Why Replace Your Charging Port?
Your G988B needs this if:
• Cables fall out easily
• Only charges at certain angles
• Shows “check charger connection”
• Fails to recognize PC connections
Critical Tools:
✓ Heat gun (80°C max)
✓ Plastic spudger set
✓ iFixit opening picks
✓ Anti-static wrist strap
Installation Process:
- Remove Back Glass – Heat edges for 90 seconds
- Disconnect Battery – Priority safety step
- Extract Old Port – Remove 6 Phillips screws
- Install New Board – Align flex cables precisely
- Test Before Sealing – Verify charging/data/audio
Pro Tips:
▶ Use B7000 adhesive for water resistance
▶ Clean corrosion with 90% alcohol
▶ Wear gloves to prevent fingerprint marks
▶ Update device firmware post-repair
Maintenance Advice:
- Use magnetic cables to reduce port wear
- Clean monthly with compressed air
- Avoid forcing cables in upside-down
- Address moisture alerts immediately
